Free · in the browser · ready to use

Free calculators

Quick answers for designing district heating, hydrogen and piping systems: heat pump, storage, electrolysis, Pressure Equipment Directive and pressure rating. Plus ready-made heat balance diagrams to keep calculating.

District heating

Large heat pump calculator

What does a large heat pump save in a district heating network? COP from heat source and network temperatures, heat cost compared with a gas boiler, CO₂ and payback.

District heating

Power-to-heat and thermal storage

How much gas does an electrode boiler save in cheap power hours, and how much more does a thermal store add? With the optimum storage size.

Hydrogen

Electrolysis calculator

Hydrogen output, efficiency, water demand and levelised cost of an electrolyser – and how much waste heat can go into the heating network.

Piping

PED calculator

Category calculator for the Pressure Equipment Directive 2014/68/EU: fluid group, chart, category, modules and inspection certificate for piping and vessels.

Piping

PN calculator

Required pressure rating of a flange from material, PS and TS to EN 1092-1, with allowable pressure and utilisation. With a free account.

Properties

Steam tables

Enthalpy, entropy, density and steam quality of water and steam to IAPWS-IF97, with h-s and T-s diagram.

Heat balance example

Deep geothermal with large heat pump

Geothermal brine heats the district heating directly, then a large heat pump extracts even more heat. Ready-built, with three load cases.

Heat balance example

Flexible CHP with thermal storage

High power price: CHP at full load, charge the store. Low power price: CHP at part load, discharge the store. With mass flows and schedule.

Heat balance example

Large heat pump in district heating

Large heat pump with real refrigerant data between return and flow, three load cases over the year, cycling and a comparison of compressor types.

Why free calculators?

Many plant design questions can be estimated in five minutes if you have the right formulas and assumptions at hand: Does the heat pump pay off in the network? How large must the store be? Which pressure rating does the flange need? The calculators give you this first answer, openly traceable and with a link to share.

When you need more detail, calculate the plant in the heat balance tool: with IAPWS-IF97 properties, load cases, pipe sizing and the lists for further design.

Missing a calculator? Post it on the feedback page.

Transparency

How we calculate

  • Water and steam to IAPWS-IF97 – the industry standard for power plant and process calculations
  • Refrigerants with CoolProp – Helmholtz reference equations, open and verifiable
  • Steady-state mass, energy and pressure balance, solved iteratively until nothing changes any more (10⁻⁷)
  • All formulas, assumptions and limits openly documented – automated tests against reference values with every change
See the calculation basis