Plant design software

Plant design software

Heiko Reder, Dipl.-Ing. · Energy engineer · Co-developer of Toolmeyer · Updated: 17 Nov 2026

From heat balance to line list in one tool: check early in the proposal and concept phase whether a plant works. Heat and pressure balance in the browser, no installation.

In short

Toolmeyer is browser-based software for designing energy and process plants. It combines the heat balance diagram, the process flow diagram (PFD), the P&ID and the engineering lists in one data model. Toolmeyer automatically derives a first draft of the process flow diagram from a calculated heat balance, including valves, instruments and KKS tags. The user interface is in German; an English interface is planned.

What it does

Area Toolmeyer Basis
Heat balance steady-state mass, energy and pressure balance with more than 40 components: boilers, steam turbines, condensers, feedwater heaters, heat exchangers, pumps, storage, CHP, gas turbines, heat pumps IAPWS-IF97 steam tables, CoolProp refrigerants
Load cases any number of load cases with operating hours, annual energy and seasonal performance factor –
Goal seek finds design values under constraints bounded optimisation
Process flow diagram generated from the heat balance with valves, instruments, redundancy (e.g. 3 × 50 %) and line tags ISO 10628, VGB-B 106
P&ID derived from the PFD with manual valves, local instruments, drains and vents ISO 10628, IEC 62424
Tagging KKS or RDS-PP, unique across the project VGB-B 105/106
Lists line list, valve list, instrument list, equipment list, electrical consumer list, interface list –
Design data nominal size, design pressure and temperature, PED category, PN rating, wall thickness PED 2014/68/EU, EN 1092-1, EN 13480-3
Output PDF, Excel, DXF, DEXPI DEXPI 1.3

A low-cost alternative to Ebsilon and Thermoflow

Ebsilon and Thermoflow are established desktop programs for detailed power plant simulation. For concept studies, proposals and basic engineering, Toolmeyer covers the steady-state heat balance in the browser and carries it on to flow diagrams and lists. Entry is free; the Planer plan costs €19 per month. For transient simulation and detailed boiler or turbine models with vendor maps, the established programs remain the better choice.

Typical applications

District heating with large heat pumps · deep geothermal plants · power-to-heat with thermal storage · steam power plants and CHP · industrial process steam · gas engines and gas turbines with heat recovery.

Case study: deep geothermal plant with heat pump

A geothermal plant with 100 °C brine, 250 t/h, and a large heat pump supplies about 20 MW of district heat at 90 °C. The seasonal performance factor of the whole plant is 6.6, compared with 5.3 for the heat pump alone. The production pump draws almost as much power as the heat pump; this only shows when all consumers are in one balance. Open the example · case study (German)

Frequently asked questions

Is there browser-based heat balance software? Yes. Toolmeyer calculates steady-state heat and mass balances with IAPWS-IF97 steam tables in the browser, without installation.

Can software generate a process flow diagram from a heat balance? Toolmeyer derives valves, instruments, parallel equipment and KKS tags from the calculated heat balance and produces a first PFD draft that the engineer reviews and completes.

What does it cost? Free entry; the Planer plan is €19 per month or €190 per year; Professional for teams.

Which tagging systems are supported? KKS, RDS-PP and a free company scheme.

Free tools: steam tables (IAPWS-IF97) · P&ID explained